Q: Where can I apply RoomMates removable wall decals?
A: RoomMates wall decals work
on any smooth, dry and clean surface: walls, mirrors, refrigerators,
laptop covers, tiles, glass, lockers,
furniture, accessories, etc.. even automotive surfaces!
Painted wall tips:
Prior to applying decals onto painted walls: clean wall and make sure it is dry.
Newly painted walls:
It is
recommended to let the paint cure for 10 to 15 days prior to
applying decals. Even if new paint feels dry, it may still need to
settle and
completely cure.
Not recommended on:
Orange
Peel textured walls .
Over
cinder blocks or very textured and porous surfaces.
Over
wallpaper or delicate surfaces.
Bathroom tips:
RoomMates wall decals can be applied onto
tiles as long as surface is clean and completely dry during installation.
Make sure the design element does not overlap grout area as water could
filter under and compromise the adhesive. RoomMates can be applied onto
shower walls, as long as they are placed tightly onto the surface so water
cannot reach under the design element. Once applied, RoomMates will not
move even if sprayed by shower.
Do not place RoomMates-decorated
items in dishwater or microwave or place RoomMates over rugs,
fabrics and any other textiles. Textile fibers may stick to the adhesive
and ruin the product.
Do not place at the bottom or
inside the tub. Water could filter beneath the design element too easily
and would compromise the adhesive.
Note: In all applications, it is always best to test
RoomMates in an inconspicuous area. If the surface is textured, performance
could be seriously diminished. Make sure surface is clean of dust and dirt or
you may compromise the adhesive and ruin the product.
Q: How do I remove air bubbles?
A: When applying, make sure you start
from one side (for the border) or the top
(for the decal) of each element. Keep the rest of the element away from
the
wall/surface. Slowly go down over the design with your hand and smooth
the
element onto surface (and press the bubbles out as you go). Once applied
you
should be able to move any remaining bubbles out by pressing/smoothing
them out
of the element. If the problem persists (this would only happen with the
giant wall decals), you can punch a tiny (invisible to the eye) hole
with a pin to push
the air out.
Q: Can I re-use RoomMates months later?
A: Even years! Simply replace the design elements onto the liner/backer and
keep your RoomMates in a dust free and room temperature environment. You can
reapply them for the next season. Or better yet - check out the new designs!
Decorating with RoomMates is so easy and affordable that you can change your
decor as often as you wish!
Q: Where are RoomMates made?
A: RoomMates removable wall decals are proudly made in the United States of America!